Tuesday, February 21, 2017

Sharpening Edge Tools With Natural Stones

Today I'd like to talk about sharpening your axes and knives with rocks and stones you can find in nature. It has been an interesting subject to me because in a long-term stay in the wilderness your minimal list of tools might not include sharpening tools. Your tools would still get dull though.

Here's how to sharpen your edged tools with stones.

Stone selection:
Stones found in river or creek beds are usually good choices. They should either be mostly flat, or kind of puck shaped. Usually they will have medium to heavy grit. I personally like mine medium grit for ax and knife sharpening. After selecting your stone, clean off any mud or debris. Then get it wet with water or oil. Now you can use it to sharpen your tool.

How to use:
Use a circular motion when using the puck on your axe and sweep the blade of your knife across the flat stone to sharpen your knife.

Here are some explanatory pictures.

The tools that I sharpened with my stones were an
Old Hickory deboning knife and my Fiskars Hatchet
along with my CT Boys Axe.
Notice how the stones are dry. 


Here's the dry puck shaped sharpening stone I used.


And the dry flat stone I used.


Here it is wet with water. 


And the puck is wet with water. 


The tools I sharpened. Notice the stones are wet.

Thank you for reading Arctic Fox Bushcraft! Come back soon for more posts about knives, axes, and bushcraft.

Thursday, February 16, 2017

Fiskars X7 Hatchet Bushcraft Review


The Fiskars X7 Hatchet has been a tool that I have had for almost a year now. I have used it for numerous fire preparations and carving projects. It has even helped me build 3 semi-permanent shelters and has held up well! It is very comfortable to use for long amounts of time. It also comes very sharp with it's own sheath, which is definitely great. Here are the specs:

Fiskars X7 Hatchet next to Morakniv Companion
Length: about 14 inches
Handle material: fiberglass
Handle grain: none
Cost: $25 USD
Overall rating: Gransfors-Bruks Predator (in other words 5 out of 5 stars)
Steel: medium to high carbon steel
Steel hardness: medium, not super hard. But not as soft as some people say.

The Handle

The handle is a special type of super strong, light-weight fiberglass that is also very comfortable to hold, unlike most fiberglass handles. Fiskars also has a lifetime warranty just in case the nearly unbreakable handle breaks. And Fiskars show amazing chopping and splitting performance for the price. Overall I am very pleased.

The Fiskars X7 comes with a practical hard plastic sheath with an orange toggle.


Chopping Performance

I don't use this to chop big stuff. On soft wood species, it chops quite well. It can chop pretty good up to about 5 to 6 inches in diameter logs.  I usually only use it for 2-3 inch though. I usually use it to chop boughs of trees to help with shelter building and for bough beds. I also use it to limb trees that I cut down to build shelters or firewood. You can also use it to split kindling for your fire.

A few chops into a seasoned pine log

Carving
This is my favorite carving hatchet. I have used it to carve rough spoons/ladles. It also carves points on to the ends of poles for shelters and shelter stakes really well. It's almost like it has a Scandinavian grind. It debarks wood very well.

Thank you for reading! If you enjoyed this post, please comment below and watch for more posts. Also please share with family and friends. Thank you!




Friday, February 10, 2017

Uberleben Zunden Swedish Fire Steel Review

This is a great traditional-looking fire steel. It has a wooden handle and it's overall length is about 3 inches. It also comes with it's own striker tied on by 550 paracord.

My Uberleben Swedish Fire Steel
Specs
Cost: $16 USD
Rod length: about 3 inches

Cord: 550, 7-strand paracord

Making Sparks

This with throw large amounts of sparks if used correctly. You can use the back of your knife but the striker supplied will usually work better. The best tender for this would be dryer lint, cotton balls, cotton balls smeared in petroleum jelly, bird and mouse nest fluff, dry shredded grass, and charcloth.  The dryer lint is my personal favorite. You can also use wild weeds or plants that grow fluffy cotton-like ball, cattail fluff, birch bark plain, or birch bark covered in highly flammable birch oil.

The Striker

I like how the striker has a few useful utilities. It included a can opener, a wrench, and a measuring stick. It is made of high carbon steel so in a desperate emergency it could be fashioned into a small blade, or you could take a piece of chert, flint, or quartz and make a spark by striking the two together. I usually use chert or quartz to make sparks as they are the easiest to find.

In conclusion, this is a great fire steel that I will be taking on many trips to come. Thank you for reading the Arctic Fox Bushcraft blog and please comment below!

Tuesday, January 31, 2017

Cold Steel Trail Hawk

Cold Steel Trail Hawk Review

This shows the branch handle I made for the tomahawk.
The Cold Steel Trail Hawk has been a tool that I've wanted to review for a while now. I will admit, I think it is a good tool. I definitely wouldn't use it over a hatchet or an axe in a true survival situation, but it is a good compliment to my council tool's boy's axe when I am out in the field. I haven't used it much, but I plan on taking it on more trips. Even if it isn't as practical as a hatchet or an axe, it is a ton of fun to throw and it will easily take down small greenwood saplings for shelter or other purposes. It will also process firewood for a small cooking fire.

Cold Steel Trail Tomahawk with sheath. (modified)


Specs:

steel: 1055 high carbon steel
length: 22 inches
handle material: grade A Tennessee hickory
overall rating: 5 stars
price: $20                                                                                                            

Features:

Chopping: This is a decent chopping tool. It is not an axe or hatchet but it will work for a day trip. It holds its edge well too.

Throwing: This can throw pretty well. It's probably one of the best cheap tomahawks you can buy. I throw mine into a palm round, but you can throw it into a tree on a camp out. Throwing it can dull it, but I've not gotten any nicks in the edge of the blade yet. Throwing it will eventually break the handle. I've already gone through two handles. It is nice, though, because the handles can be replaced easily out a branch, for example.

Carving: To be honest, it doesn't carve all that well. If you re-profiled it, it might do okay but I haven't tried this and the steel seems too soft for it. However, the steel being soft helps with throwing and chopping because it is less likely to get chipped on the edges. But the steel being soft for carving makes it so that you can't get it as sharp as you would like. It can carve a tent stake or a shelter stake though.

Sparking a ferro rod: Being high carbon steel, it will throw pretty good sparks off a ferro rod.

Thank you for reading and please comment below.
                                                                                                                                                                                                                                                                                           

Friday, January 6, 2017

Council tool boys axe sheath.

Council Tool boys axe sheath

       Today I made a sheath for my council tool boy's axe. Here is what it looks like on the axe.

The custom leather sheath I made for the axe.
You can also see the stamped "USA" on the head.
It is very simple, but I do not know how long it will hold. The three components of it are the leather, heavy thread, and paracord. To make it, I took a square of leather and folded it over and stitched it up on the non-folded sides except for the part where the axe bit rests. It is kind of like a mask sheath. Then I took the paracord and tied it into holes cut on both sides and looped it around under the shoulder of the axe. To make the holes, I high-quality sewing scissors.

Here's the full view of the axe and the top view below. 

The handle grain runs tight and straight, just as I had hoped. it would..

Hope enjoyed this post! Thanks for reading. Check back for the full review of the Council Tool Boys Axe coming soon!




Tuesday, November 29, 2016

How to Build an A-frame Shelter

An A-frame shelter in heavily timbered areas will stand up to lots of snow and wind if you build it right, and could even be a permanent shelter option for a place that you camp often. Here's how to build one.

          Step one:  Draw out the plans. Will it have A-frames on the back and front end or will it have trees supporting the main beam? Also work out how tall the main beam will be and how wide it will be. You will also need to find two trees suitable as ridgepoles and they will have to be the right distance apart, at least big enough for you to be able to lay in between them.  

Side view A-Frame Shelter built with Fiskars axes
                               

         Step two:  Gather materials. This is the longest part of the process of constructing an A-frame. You will need rafters, pine needles, leaves, dirt or mulch. You will also need lots of firm, thick bark for shingles. Preferably the main beam will be a green pole. A dead one will do though if it is not going to snow and you are only staying for a night or two. Otherwise you will need a green pole for the strength.  To obtain a green pole, chop down a sapling or small to medium tree depending on how big your a frame will be. It should be thick enough that it should be able to support the roof even when it is covered in 1.5 feet of snow. Any more then this should be scooped of periodically.You will also need a good amount of stones to put around the base. You will also need lots of rafter of the right length and thickness. These, however, do not need to be green wood, so it is best that you only use green wood for the rafters in an emergency or survival situation where you need wood fast. Otherwise just use dead wood or trees that are bent over and will die soon anyway. You will need the leaves, pine needles, and mulch for your insulation, and you will need lots of it.

         Step three:  After gathering all of the materials you need, you will need to start constructing. Once you have found 2 ridgepole trees or made your own supporting A-frames you will need to put the main supporting beam of the shelter in between them. You will need a good amount of rope or cord to make strong lashings. Now start laying on the rafters. The rafters do not have to be debarked, nor do they have to be green wood. After you are finished with the rafters, you will want to start covering them with the pine needles, leaves, or mulch. Make a nice thick layer over the rafters. After this, you will want those bark shingles to make it more waterproof. Then make some wooden stakes. Each of them should be about as tall as the shelter. Drive them into the ground in front and to the rear of the shelter. Then, stack thick loads of pine needles and green boughs up in and against the poles. Open a way for the door. To cover the door, you can use a blanket, tarp, or pine boughs. Put stones around the perimeter of the shelter floor. Then make one or two bough beds for comfort. Now your shelter is ready!

Front view of shelter:
From here you can see the main beam, 
the rafters holding up the pine needles and leaves, and the bough bed.
This an A-frame with an open front. You can also see the
Fiskars X15 and the Fiskars X7 Hatchet and Ax that I
used to build it. Lots of chopping! 


Thank you for reading, please comment below and watch for more posts!

Monday, November 21, 2016

Morakniv Companion sandvik stainless steel military green review

This is quite a good knife for the price. It is good for bushcraft on a budget but in no way is this a beginners knife. This is one of those penny knives and it is also a great knife for anyone from the weekend woodsman to the advanced bushcrafter. The sandvik stainless steel makes it great for wet environments and it won't be as hard to maintain for the beginner. This knife also comes with a beautiful smoky mirror finish. However, the back edge of the knife will need to be filed with a mill file because it has a smooth finish and that won't be good for throwing sparks off a ferro rod. Other than that, this knife comes perfect.

Making kindling with the Morakniv Companion

Here are the specs-
Cost: $12
Steel: sandvik stainless steel
Length: about 9 inches
Handle material: synthetic
Overall rating: 5 out of 5 stars
Country of origin: Sweden

Here's how it does these specific tasks:

Feathering: This knife is a great featherer and carver due to its Scandinavian grind. It has a very thin edge, which makes it a great slicer and cutter; it will carve and feather better than any knife that I own now; the smoky mirror finish also makes it very smooth which makes it slice through wood and other materials with ease. My favorite thing to do with it is carving green wood but it will also cut dry, hardwood very well.

Batoning: Some people say this can't baton due to its short tang. It is about 3/4ths tang. It has kind of a rat-tail tang. Every time I make a fire, I use this to make the kindling. It can baton kindling at least.
A small notch chopped out of a 2x4 with the Morakniv Companion

Chopping: This isn't a giant survival knife, however, it can chop through green wood to a certain extent if need be, or if you're just getting a really slender stick to make something. If you're cutting pine boughs, this will do the job if you need some for your shelter or your bough bed. What I'm saying is it can chop small branches and baton in a pinch if need be in a survival situation.

Throwing Sparks: This knife is stainless steel so you wouldn't expect it to throw sparks very well. It may not be as good as a carbon steel knife, but it is a very good close second from my comparisons at least. I filed the back edge to make it sharp so I could hit it against a ferro rod and I also hit it with a piece of sharp quartz rock and it did produce sparks. Overall it is good for fire-making.

The sheath: the hard plastic sheath is not very secure. It comes decent though. However, it is very strong and durable. And I like the clip because you don't have to have a belt, you can just clip it onto your waist. It also has a drain hole drilled in the bottom so if it gets wet or rains it can drain. The good thing about the plastic is that it won't soak up water. I have the military green one so it also helps it blend in to the outdoor environment. The rubber handle is comfortable and it fits the hand.

Lastly, you can go to High Carbon Steel Love on you tube at https://www.youtube.com/watch?v=ca7ooM1RBvI and watch his video about the Morakniv heavy duty knife. He explains how to keep your Morakniv and sheath more secure so the knife doesn't fall out.

Thank you for reading. Subscribe and comment below.